A couple of Journeys, so what issues?

So I've had the car out and the good news is no major issues after doing around 70miles. I've put a new exhaust tip on which Ill show soon and Id been having a problem with it staying still but I've solved that. Ill detail more on that next time.

So I headed over to see my uncle and he noted that he could hear some squeaking and it was quite loud! This will be the polyurethane bushes, when I fitted them I thought there wasn't really enough grease with them. Well its been over 2yrs now and they need re-greasing, so ill do that. At the same time I'm going to fit heavier springs at the front. The suspension is just bottoming out and a bit more resistance should stop this or at least help a lot, I still don't want it too hard though.

Dashboard in and seats test fitted

So the dashboard had to be put in over the centre tunnel. It was a tight fit but in some ways that is good as it wont move. Ive only had to secure it to the cross member with 1 sturdy bolt just to hold it there and being honest I dont think it needed it other than for safety.

Once In I tested the dials and gauges all worked as well as the stereo.

All worked well and the look felt more natural. Next i made the vanity panel to go over the dials and the stereo. I actually mucked this up and got dirt under the wrap as I put it on the wrong side so it will need to be done again at some point.

I also put the buttons too far forward and only the hazard is accessible, lucky I can just drill new holes further back and move them.

The seats also go well with the dashboard and feel much comfier, however I will have to get rid of the seat rails and making them fixed, the extra cushioning has raised the position and the 25mm drop will be a big gain to have.