Wednesday 11 June 2014

Rear lights, Problems and wheels

The update is a bit late this week as the weekend was nice so I did some work on the car and then Sunday went for a picnic...by time i was back it was F1 time and then I'd run out of time.

So following on from last week I also test fitted the doors and front bumper to get an idea of the amount of work.




So the good news;
Front bumper little work to get looking good.

bad news;

The doors I'm not sure how much work yet but mounting point need to be opened up a bit and go from there really! I think I can get them to sit well enough but will be fair bit of work, in all honesty the doors I don't think should of been shipped how they are especially the passenger side which has been sanded just to allow it to close on one click of the latch, sad but it is a fact none the less and I said id write the good and the bad and this is the worst thing so far....lets see how bad it actually turns out to be!

You can see in the pic the wider gap where the door wants to sit up slightly, hopefully by modifying the hinge brackets a bit I can get this to be a better fit, I'm sure I can do something.

The trim id put around the door had to come off, there isn't the space for that size trim in some areas of the door fit so I will have to go for slimmer trim, again the gaps around the door differ a bit so might need some work (if only you could bend fibreglass).

I moved on from the door as that work is for another day and I just wanted to understand the scale of the work. So I moved back to the bumper, now for the IVA test all gaps / grills are radius tested by filling it with a mesh with gaps less then 10mm the edges just have to be blunted. So i used some diamond shape 9mm - 6mm. Worked really well and easy to work.

Its only bent in place at this time, id ideally like to know a secure way to attach but be able to remove...silicone?!?!


At this point I wanted to work on the last mechanical pieces...throttle pedal linkage but something didn't feel right, so I removed the pedal...I had had to modify the pedal to get a god pedal fit in the footwell removing some bracing and I ended up with this...


You can see the arm has twisted on the pivot....its now being made out of much stronger steal, it wont fail on me again!

so with the pedal shipped off it was time to do the rear lights, now the IVA test does specify that a fog light cannot be within 100mm of a stop lamp...so the standard 3 big circle design was out, so I've kept the 2 circles and gone for a matching pair of fog and reverse light. After the test this will allow me to do some nice cut outs and more mesh which I think will look good. I also fitted the rear number plate light.



And finally I choose my wheels, they are 19" and I got them from Rarerims.co.uk. I've really pushed the size limits with 8.5J at the front and 10.5J at the rare, but i love the look of the wheel. I've just got to decide on the colour of the wheel to go with the final car colour.


So the next weeks work will be extending the rear wiring for the lights, fitting front indicators, getting some tyres on to the new wheels and having the windscreen fitted.

3 comments:

  1. Hi - Been following your build since you linked on pistonheads, great effort and keep up the good work ! Really love following the progress every now and then, this blog is inspiring.
    Love the wheels - What make are they?

    ReplyDelete
  2. Hi, thanks for the kind words. The wheels are rota grid drift wheels and are currently off having a custom finish applied to them

    ReplyDelete
  3. Been following for a while.

    Keep up the good work! I'll be following until I can build one myself.

    Cheers

    ReplyDelete